High Energy - Manufacturer, Ambala Cantt, India

To inquire, Select Product/s & Click on

Product Code : 01

[Select]

Product Specification

SParc S12:
Power Generation utility operators and flare stack manufacturers throughout the world have made the switch to Hindustant Thermometer S12 High Energy Pulsed Arc Ignition System.

The SParc S12 Offers superior engineering, expert craftsmanship, unmatched reliability and remarkable efficiency.

Through the introduction of solid--state technology and the use of a highly reliable dual capacitor discharge pulse electrical arc, the SParc S12 consistently and efficiency delivers an output power level of 2000000 watts peak per spark. Through the delivery of such energy by way of a continuous spark, the SParc S12 directly ignites fuels used by coal, gas and oil fired power boilers, gas turbines, process heaters and incinerators.

The SParc S12's direct ignition, continuous spark capability reduces operating costs through the elimination of the need for gas pilots. It provides consistent ignition and fuel combustion, even at low air flow levels. And the SParc S12 is capable of cleansing itself of moisture, excess fuel deposits and carbon buildup, thus enhancing and performance of the system and extending the life of its components.

SPark S12 provides
reliable starts with self-cleaning operation;
quicker cold starts;
considerable fuel savings; and
simple retrofit conversion

SPark S12 eliminates or reduces
fuel handling equipment, piping and valving;
igniter air systems;
need for Number 2 oil/gas for ignition; and
flame substantiation equipment.

SPark S12 Stabilizers
the main flame for improved combustion and wider turndown capability.

SPark S12 features
Components that are impervious to moisture, fuel oils and carbon buildup; and a two year warranty on the exciter.

And the SPark S12 is suitable for indoor or outdoor use.

Exciter	S12-IP/N 5000066 0772, 0004.01 (BHEL) NEMA 4	S12-3P/N 0775, 0008.01 (BHEL) NEMA 4
Enclosure Dimensions Height	6.1/4 inches	6 inches
Width	10 inches	10 inches
Depth	9.1/2 inches	8 inches
Weight	22 pounds	26.4 pounds
Input Voltage	110/130 VAC (note 4) 50/60 Hz	110/130 VAC (note 4) 50/60 Hz
Current	3 AMPS (RMS); 15 AMPS AT 230 VAC	3 AMPS (RMS); 15 AMPS AT 230 VAC
Stored	12 Joules Nominal	12 Joules Nominal
Spark Rate	5-6 per second Nom.	5-6 per second Nom.
Duty Cycle	15 minutes ON 30 minutes OFF	15 minutes ON 30 minutes OFF
Operating Temperature	-40^oF to + 165^oF	-40^oF to + 165^oF

Flexible Cable	P/N 0645.0017.01 (5000102) (note 7)
Construction	Coated Conduit
Available Lenghts	Custom built to customer's requirements (note 2, 3)
Output Voltage	3600 VDC (note 6)
Operating Temperature	-60^oF to + 300^oF

Rigid Spark Rod	P/N 0645.0027.01 (5000017) (Note 7)
Construction	5/8 inch type 304 Stainless Steel
Available Lengths	Custom built to customer's requirements (note 2, 3)
Output Voltage	3600 VDC (note 6)
Operating Temperature	-60^oF to + 300^oF cable end; 65^oF to 1000^oF tip end

Spark ROD Tip	P/N 0147.0002.01
Construction	Shunted surface semiconductor pin connection to Spark Rod stainless steel 400 CM (160 minutes)
Operating Temperature	+65^oF to + 1000^oF
Length	7 inches (note 2)
Diameter	5/8 inch (.625)
Connection	9/16 inch - 18 UNF - 2A
Weight	1/4 pound

Retractor	P/N 0645.0044.xx (5 inch Stroke) 0645.0044.xx (8 inch Stroke) 0645.0044.xx (10 inch Stroke) (note 5)
Air Cylinder	1.1/2 inches diameter x 5 inches, 8 inches or 12 inches stroke using dry and clean air supply
Operating Pressure	70 to 100 psi
Solenoid Valve	Two position 4-way
Electrical Coil Voltage	110-120 VAC (note 4)
Frequency	50 to 60 Hz
Inrush @ 50 Hz	42 VA + 5% - 15% volts tolerance
Inrush @ 60 Hz	35 VA + 8% - 15% volts tolerance
Inrush @ 50 Hz	22 VA + 5% - 15% volts tolerance
Inrush @ 60 Hz	18 VA + 10% - 15% volts tolerance
Mechanical	1/4 inch NPT ports
Limit Switch	2
Voltage	110-120 VAC (note 4)
Frequency	50-60 Hz
Characteristic	SPDT
Current	10 AMPS Continuous
Temperature Range	-20^oF to + 225^oF (nore 1)

Flexible Spark Rod	P/N 0645.0026.01 (5000016) (note 7)
Construction	5/5 inch Stainless Steel Tube with 30 inch flexible section Pin connector design insures maximum energy transfer
Available Lengths	Custom built to customer's requirements (note 2, 3)
Output Voltage	3600 Volts (note 6)
Operating Temperature	-65^oF to + 300^oF cable end; -65^oF to + 1000^oF tip end

Other Products in 'Boilers, Components & Spares' category

Flame Scanner System	Flame Scanner

<< Back